CAMARO6 - View Single Post - Maggie 2650 Build

Grumpy1 · 04-30-2021, 10:39 AM

As of now (although things can change - Lol) I think I'm going to do this build in two phases, maybe.
Phase 1) complete bolt on, fuel 2) heads and cam, fuel, cooling -heat exchangers.
In the first phase I'm hoping for 700-750rwhp, if I feel I need more then I'll go to phase 2. To get to that # in phase 1 I know fuel needs to be addressed which I don't mind. Rather be safe than sorry and figure whatever I do will help for phase 2.

Decided to see if that 700plus range is good enough for the street. Want to have fun but not where the car is unusable. As I've said in other posts this is a street car, will not see time on a road course but maybe the occasional trip to the drag strip. If I break the time where I need to invest in a roll gage then that's out too.

Here's my list for phase 1 so far.
Maggie 2650
80 or 90mm pulley
9.2" drive pulley
Gates Green belt
103 Nick Williams T/B and snout
Kooks 2" LT w/high flow green cats, x-pipe to the stock suitcase.
Rotofab Big Gulp
160 deg thermostat
Fuel??

Fuel is the only place I'm undecide on but willing to do what I need.
Low side - JMS booster - anything else...…aux fuel pump?
High side - what are my limits with stock cam?
Can add an XDI pump but what about injectors. Do oem injectors have room for the added fuel or do I need the +30. Hate to invest in +30 if in phase two I decide on +65.

Appreciate everyone input...….

04-30-2021, 10:39 AM	#1
Grumpy1 Drives: 2018 ZL1 Hyper Blue A10 Join Date: Jan 2018 Location: Covington LA Posts: 646	Maggie 2650 Build - Final Thoughts As of now (although things can change - Lol) I think I'm going to do this build in two phases, maybe. Phase 1) complete bolt on, fuel 2) heads and cam, fuel, cooling -heat exchangers. In the first phase I'm hoping for 700-750rwhp, if I feel I need more then I'll go to phase 2. To get to that # in phase 1 I know fuel needs to be addressed which I don't mind. Rather be safe than sorry and figure whatever I do will help for phase 2. Decided to see if that 700plus range is good enough for the street. Want to have fun but not where the car is unusable. As I've said in other posts this is a street car, will not see time on a road course but maybe the occasional trip to the drag strip. If I break the time where I need to invest in a roll gage then that's out too. Here's my list for phase 1 so far. Maggie 2650 80 or 90mm pulley 9.2" drive pulley Gates Green belt 103 Nick Williams T/B and snout Kooks 2" LT w/high flow green cats, x-pipe to the stock suitcase. Rotofab Big Gulp 160 deg thermostat Fuel?? Fuel is the only place I'm undecide on but willing to do what I need. Low side - JMS booster - anything else...…aux fuel pump? High side - what are my limits with stock cam? Can add an XDI pump but what about injectors. Do oem injectors have room for the added fuel or do I need the +30. Hate to invest in +30 if in phase two I decide on +65. Appreciate everyone input...….