Quote:
Originally Posted by DenverTaco07
I can't get the motive to seal. I've tried so many times I'm tired of it. using thin gasket, it's obvious it will never work, audible air leaking at around 5 to 8 psi. Using the thick gasket, it seems promising, but very slow leak. I've tried tightening all connection points, using teflon tape on threads between hoses and using wrenches to tighten etc. I've tried this so many times i've lost count and each time it leaks slowly, about 1psi a minute.
this is very frustrating.
|
I used the 0108 kit with the thick gasket and it works like a dream, it's tough to get it twisted on right at first for sure, but it seals to 20psi and holds all day. I wonder if there are tolerance differences in the plastic reservoir that cause these issues for some.