View Single Post
Old 05-29-2014, 09:08 AM   #11
Apex Motorsports
 
Apex Motorsports's Avatar
 
Drives: 2000 Camaro SS
Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
Quote:
Originally Posted by Dropspeed View Post
Pedders front springs actually have a lower front spring rate than the stock SS and SS/1LE.

Front coil 220032, Linear Rate, 130Lb/inch or 2.3Kg/mm
Rear Coil 220033, Linear Rate, 433Lb/inch or 7.8Kg/mm


Matt
"Always" is an absolute term which is, of course, dangerous to use. However, the Pedders springs are not true linear rate springs. I believe they are actually a dual or multi-rate spring (kind of a hybrid spring) which means there is a lot more going on there and the rates quoted do not tell the entire story. If you assume that they were a true linear rate spring and those rates are correct then they would be about 80lbs/inch softer in the front than the next closest set of Camaro springs and those springs would have close to a .5" less drop. That would lead to a lot of nose diving when braking and bottoming out.
Apex Motorsports is offline   Reply With Quote