View Single Post
Old 04-19-2020, 08:27 AM   #1
DesignAlot
 
DesignAlot's Avatar
 
Drives: 2019 Shadow Gray 1SS M6
Join Date: Jun 2011
Location: PSL, Florida
Posts: 169
Removed Passenger seat, airbag light now

SOLVED
Dealership had to replace air bag wiring plug on bottom side of seat on passenger seat.

Hello, I know I should have disconnected battery first, but I did not. I removed passenger seat on my 2019 Camaro SS. I installed Katzkin leather seat covers after removing the original fabric. I carefully installed back in car, connected the little airbag plug on the side of the seat and the main harness under the seat. Now when I start the car, airbag light stays on. I currently have disconnected the battery, and I am waiting 30 minutes. I will then connect again. In the meantime, I will disconnect main seat harness and airbag connecter and re connect. Any other ideas? Not sure if this will work. Do I need to go to the dealer to reset this, or could something possibly be more wrong? I have the torque pro app to reset engine codes, but it does not seem to have anything for the SRS resetting. HELP!
__________________
DesignAlot

Last edited by DesignAlot; 05-12-2020 at 05:58 PM.
DesignAlot is offline   Reply With Quote