CAMARO6 - View Single Post

SomeGeoffGuy · 01-17-2021, 12:59 PM

I wouldn't bother trying the GM plate, it was designed for the LT1 and would probably cause problems if installed on anything but factory stuff.

If you bought the MSD used, did you replace the gasket with a new one? The OEM gasket - which looks pretty similar to the MSD - is supposed to be replaced whenever you remove the throttle body. I would be that is your issue. Just get a new MSD gasket.

-Geoff

01-17-2021, 12:59 PM	#11
SomeGeoffGuy Drives: 2023 2SS Convertible Join Date: May 2009 Location: Metro Detroit Posts: 1,063	I wouldn't bother trying the GM plate, it was designed for the LT1 and would probably cause problems if installed on anything but factory stuff. If you bought the MSD used, did you replace the gasket with a new one? The OEM gasket - which looks pretty similar to the MSD - is supposed to be replaced whenever you remove the throttle body. I would be that is your issue. Just get a new MSD gasket. -Geoff __________________ '12 2SS RS Convertible - Traded in. '16 2SS Convertible - White on white, mag-ride, NPP, nav. Sold! '23 2SS Convertible -Same as above except orange.