CAMARO6 - View Single Post - My A8 is finally giving up after over 180 passes

laynlo15 · 04-18-2019, 10:06 PM

Venom, the tranny is good, cough no T400 needed. Ha. I'm at 800 rwhp on my last dyno in February. We pulled a little power out so my axles will survive until I get those ordered. Haven't been back on the dyno but probably 750 the way we are running it right now with 3 degrees less timing up top and a few degree down low on the launch. Taking it easy till the Camaro Fest and then things will change. Then we'll see if the tranny still holds up

04-18-2019, 10:06 PM	#20
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Venom, the tranny is good, cough no T400 needed. Ha. I'm at 800 rwhp on my last dyno in February. We pulled a little power out so my axles will survive until I get those ordered. Haven't been back on the dyno but probably 750 the way we are running it right now with 3 degrees less timing up top and a few degree down low on the launch. Taking it easy till the Camaro Fest and then things will change. Then we'll see if the tranny still holds up __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff