CAMARO6 - View Single Post - My Build A10 2018 -Results and sound 640whp 660lbs torque

EDFHOBBIES · 07-24-2018, 02:28 PM

Funny I have similar mods.. I made 643 when it was cool probably 55 degrees (9.17 LIngenfelter lower, TSP headers, TM TB, and Stock cut box) I went back on a 85 degree day to test my results of the Carbon Elite filter.. I re-dynoed with the same setup made 659 then swapped the stock box for the Carbon one and made 658..

I'm not sure if I'm gonna pull blower and heads off and port or just buy a bigger blower seems like the bigger blower is the way to go for the money and end goal of 750 with no meth.

07-24-2018, 02:28 PM	#27
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	Funny I have similar mods.. I made 643 when it was cool probably 55 degrees (9.17 LIngenfelter lower, TSP headers, TM TB, and Stock cut box) I went back on a 85 degree day to test my results of the Carbon Elite filter.. I re-dynoed with the same setup made 659 then swapped the stock box for the Carbon one and made 658.. I'm not sure if I'm gonna pull blower and heads off and port or just buy a bigger blower seems like the bigger blower is the way to go for the money and end goal of 750 with no meth. __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber