Quote:
Originally Posted by TP2SS
How did you circumvent the sensors that won't let the top retract if the divider isn't place? I'm assuming it's some sort of proximity sensor that detects the presence of the clip on the tab. If it's just proximity that could be solved by hacking up a divider and just putting the clips on the tabs. What I don't know is if there's some sort of continuity circuit that connect the upper clips with the lower, making all 4 needing to be in place, with a circuit connecting them.
I'm going to get some non RFs at some point and plan to take some longer trips in areas that could take roadside service a hours-long wait. That's not too appealing!
|
Just use a small neodymium magnet. I took the sensor off and put a magnet behind it also. This made the front magnet stay better.