View Single Post
Old 12-09-2019, 11:37 AM   #1
Living_Quiet
 
Drives: 2010
Join Date: Jan 2013
Location: us
Posts: 46
Paint flaking on bottom edge of trunk. What would you do?

Camaro is only a few months old.

There is a small spot on the panel edge of the trunk under the bowtie that has finally flaked off. I thought the paint was raised in that area from excess clear coat that had dripped, but it was apparently a bubble that has finally popped and is now flaking.

I can only see it when the trunk is open. It's 1/4" wide and came off the entire bottom edge. The flaking wraps around to the back side of the trunk though, so probably 1/4th in depth as well.

Should I take it to the dealer and have them fix it? Or should I just get some touchup paint and do it myself?

I'm capable with these sorts of projects, so I don't want to waste time at the dealer if that's all they're going to do and I feel I can do a better job at it.


Here's a picture:


Last edited by Living_Quiet; 12-09-2019 at 11:44 AM. Reason: added picture
Living_Quiet is offline   Reply With Quote