Quote:
Originally Posted by adman98
I have a manual so I'm good on the flanges. I'll check out ebay. Thank you.
Did you do the install yourself?
|
Yes.. on jack stands. Fairly easy. Need an extra hand to help stabilize and align the diff as it's coming out and going in. Takes about 3 hours. I've swapped mine back and forth 3 times and helped a friend modify one for his ATS which took 3 tries. After getting the exhaust out of the way.. it's a few 18mm bolts for drive shaft and front of diff, 24mm for back bolt, then e12 torx bit for axle bolts. Pop the 2.0 flanges and put them in the SS diff. Reinstall.