CAMARO6 - View Single Post

wookwook · 10-29-2020, 08:28 PM

windshield washer fluid, aka Meeeeettttthhhhh...

It gives you wings!

I made a die from a piece of 3/4 copper and burned a cutout in the air duct for the dash gauge wires.
Pinch seam was ground for a grommet and hose went flush plenty of room behind the liner.
My local guy bunged and tapped the mishi cold side way low just after the IC.

Your welcome.

Name: IMG_20200302_172000.jpg
Views: 337
Size: 193.3 KB

Name: IMG_20200302_172000.jpg
Views: 337
Size: 193.3 KB

Name: IMG_20200303_161151.jpg
Views: 276
Size: 82.6 KB

Name: IMG_20200304_171835.jpg
Views: 300
Size: 260.8 KB

Name: IMG_20200307_111646.jpg
Views: 442
Size: 161.0 KB

Name: IMG_20200306_152742.jpg
Views: 320
Size: 139.2 KB

Name: IMG_20200307_115430.jpg
Views: 339
Size: 171.6 KB

Name: IMG_20200304_171900.jpg
Views: 288
Size: 198.7 KB

Name: IMG_20200306_152746.jpg
Views: 318
Size: 217.6 KB

Name: IMG_20200307_111416.jpg
Views: 316
Size: 276.4 KB

10-29-2020, 08:28 PM	#74
wookwook Drives: 18 Camaro LS M6 Join Date: Apr 2019 Location: NH Posts: 698	windshield washer fluid, aka Meeeeettttthhhhh... It gives you wings! I made a die from a piece of 3/4 copper and burned a cutout in the air duct for the dash gauge wires. Pinch seam was ground for a grommet and hose went flush plenty of room behind the liner. My local guy bunged and tapped the mishi cold side way low just after the IC. Your welcome. __________________ . . . NFG M6 2T Mishimoto Hot side pie \| ZZP Catted DP \| KN Drop in \| Borla - Sport Tour \| Apex Arc 8 - square \| Wookster Tuning+ \| Flex Fuel Last PB 4.8, 13.2@106 Last edited by wookwook; 10-29-2020 at 08:54 PM.