View Single Post
Old 07-18-2016, 01:02 PM   #32
cellsafemode


 
cellsafemode's Avatar
 
Drives: 2016 Camaro 1LT
Join Date: Jan 2016
Location: California
Posts: 3,491
So you're connecting both the PCV passenger side tube and the tube on the driver side to the can.

Have you had actual results with that setup? I assume the return tube from the can picks one of the connections back to the intake tube depending on which side of the car you plan on installing it on and closes the other off.

I haven't seen any "oil" from either tube on the intake, only dry carbon buildup on the throttle body and I assume in the valves. but I haven't removed the throttle body to take any pictures of the intake manifold. Intake tube is dry though and if oil vaporized or not was passing through it should have left something there but it's bone clean.

I currently only have the passenger side connected to my can. So far still nothing showing on the can's gauge tube. But i only have like 400 or so miles on it.
cellsafemode is offline   Reply With Quote