Quote:
Originally Posted by its_giooo1
got it!!!!! ill go with 275/30. 315 wouldnt rub with mag?
thank you so much for the info!!!!!!!
|
No rubbing at all with 315s. Note that my main body wiring harness is relocated on the driver side, see
this thread for details.
As to front sizes, 275/30 will be too short and may cause stabilitrak/ABS issues when paired with 315/30 in the rear, because the front end will be 4.3% shorter while the rear only by 0.7%. You will also lose almost 18% of your front sidewall, so I bet the ride will be tangibly worse.
I'd say either simply go with the SS 1LE specs, or have 35 aspect ratio in the front. I can recommend my setup, it works perfectly well; if you want to fill the wheel wells a bit more, you can do 285/35 fronts (with small spacers) paired with 325/30 rears, it will still work fine.
(
https://tiresize.com/comparison and
https://www.wheel-size.com are your friends.)
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq
Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods
JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune
1100 - 1/30/18 | 2000 - 1/31/18
3000 - 2/06/18 TPW 2/26/18
3400 - 2/19/18 | 3800 - 2/26/18
4300 - 2/27/18 | 4B00 - 3/01/18
4200 - 3/05/18 | 4800 - 3/14/18
5000 - 3/16/18 | 6000 - 3/19/18