Quote:
Originally Posted by craigss50
The rubber is cut from a piece of stair step mat. I traced the outline on a piece of heavy paper cut and sized to fit. Use 3m trim tape to tack it down to the defrost grill. I only taped the edge close to the windshied so the rear of the rubber can blow up a little so some air would come out but not aimed close to the windshield. Works great. Looks ok. BTW the oversized mouse pad looks like it would also work.
|
I have done something like this, the only issues I have now are the cold air coming from the side defroster vents and the rubber also out gasses onto the windshield. When I park, I take the cover off and then put it back on when I use the car.
Has anyone made any covers for the small vent for the side windows?