CAMARO6 - View Single Post

NickyRacerBoy · 03-27-2018, 10:37 AM

At NJ Motorsports Thunderbolt course on the 17th and on 4th lap going thru turn 11A the car locked up and put me into a major tail spin. 98 mph to be exact as whole thing is on PDR which i need to edit and post. So motor is ready to be dropped out the bottom and should have lots of pics of the carnage!
Not sure if bearing on the big end of the rod was the issue or something else. Car is stock minus Flex TSP headers and Rotofab. I was running straight pump when it happened. Cosworth Data log shows "vehicles heath" OK for hi and low oil PSI.
New long block on the way but need oil pan baffle etc...Anyone gotta good line on parts?

03-27-2018, 10:37 AM	#1
NickyRacerBoy Drives: 1LE Join Date: Sep 2017 Location: East Coast Posts: 1,473	*Fck me! Tossed #5 out the block!** At NJ Motorsports Thunderbolt course on the 17th and on 4th lap going thru turn 11A the car locked up and put me into a major tail spin. 98 mph to be exact as whole thing is on PDR which i need to edit and post. So motor is ready to be dropped out the bottom and should have lots of pics of the carnage! Not sure if bearing on the big end of the rod was the issue or something else. Car is stock minus Flex TSP headers and Rotofab. I was running straight pump when it happened. Cosworth Data log shows "vehicles heath" OK for hi and low oil PSI. New long block on the way but need oil pan baffle etc...Anyone gotta good line on parts?