I guess, i could do option C and do both 2650 and cam at same time and hold off on doing the drag pack. That way i am not paying for labor and tuning twice. As others have mentioned, i have to be concerned with fueling. I will not run meth. With my goals of 9.7-9.9 range i am thinking it could be done with 750rwhp.
So, with those goals in mind, could i get by with a cam with decent fuel lobe and a low side pump upgrade or will i still need to do more fueling than that. I don't want to stress the system. Dependent transportation is a must, so if i have to do other fueling, i am interested to know. I know 800hp+ injectors, and HPFP, etc need to be done, but with my goals, its a gray area to me.
__________________
Sold 2012 2LT RS 12.3@112 old setup
Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS.
2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17
2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. **807hp/762tq on 93 gas** and **848hp/792tq on e47**
Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver
Daily Driver 2021 BMW M340i Xdrive
|