Quote:
Originally Posted by ScottMZ3
Keep us posted! Seems like I'm definitely not alone with the issue.
|
Folks,
I was able to correct this pretty easily (took 15 minutes using a couple of tie wraps). If needed, I will post a full writeup on how to remove the tail light but for the below just assume you have it off already (it is easy). If you search online there a ton of youtube videos on it since many of the SS guys (myself included) swapped out our red tail lights for these awesome 1LE ones!
Here is a before pic of the badly misaligned bumper. Ouch!
Remove the tail light and you will see that just under it are the tabs that the rear bumper hang on. These tabs do not hold the bumper tight enough, so we are going to help it a little.
Use a couple of tie wraps on the inside edge of the tabs and pull tightly while someone holds the bumper into the right alignment spot. Those tie wraps will pull the bumper into place and hold it into the right spot. (see below)
Put the sucker back together and behold your properly aligned bumper for your very expensive Camaro!
.
.
.
.
.