Quote:
Originally Posted by Move_Over
Nice find. Looks like a quality part. Do you have any photos installed, i'd like to see if the shoulder pops through the brake hub mating surface?
There's two things that concern me just a bit about those is the knurl diameter is less than stock, not that .2mm is a deal breaker (OEM is 16.1mm) , but with a knurl designed with such tight tolerances i'd hate for you to spin it in the hub. Second is the shoulder length looks to be longer than stock.
|
I'll snap some pictures when I get everything put back together. I still have the front struts out from installing new springs.
When I measured the knurl diamater on the old ones that I knocked out, I got ~ 15.30mm...
