[Move_Over]

Originally Posted by JeromeS13

FYI, PTC 97419 studs work too. I ordered them from Rock Auto $1.10 each (much cheaper than Dorman or ARP). They're ~ 15mm longer overall, but have ~24mm more thread engagement, due to being threaded longer.

https://www.rockauto.com/en/moreinfo...841348&jsn=254

Nice find. Looks like a quality part. Do you have any photos installed, i'd like to see if the shoulder pops through the brake hub mating surface?

There's two things that concern me just a bit about those is the knurl diameter is less than stock, not that .2mm is a deal breaker (OEM is 16.1mm) , but with a knurl designed with such tight tolerances i'd hate for you to spin it in the hub. Second is the shoulder length looks to be longer than stock.