Quote:
Originally Posted by kaamacat
I secured mine with 1/4" Torx Thread Forming (after pilot holes), then where possible underneath, replaced with replaced with Torx 1/4" bolt/washer and secured. All hardware coated with Marine Grade Anti-Seize.
My "maiden voyage" to RoadAtlanta was only 30miles, but, wanted to run through the paces anyway. Was very happy with the MACS straps as-well.
And agreed on the 1LE suspension...
|
Pretty much the same here. Except I used hex head self-tapping screws, and I put red locktite on the nut underneath. I hope they seize! LOL