CAMARO6 - View Single Post

Stan1ley · 06-17-2020, 09:41 AM

Hey,

So I made this video showing how to swap out the GM sway bar end links. I have heard many other 6th Gen owners having issues with their end links as well. The nut on the passenger side was backing out after I would tighten it up, causing a "clunking" noise going over bumps. If you are having this problem these BMR end links may be your solution!

Also have heard of these same parts actually bending under hard driving. Not what you want! The BMR links are also adjustable, for all my hardcore track drivers.

LINK: https://youtu.be/q-Qv6joDGvo
PARTS: https://www.summitracing.com/parts/BMR-ELK016

06-17-2020, 09:41 AM	#1
Stan1ley Drives: 2017 Black 1LE Join Date: Feb 2017 Location: Atlanta Posts: 87	Noisy Sway Bar End Link Solution Hey, So I made this video showing how to swap out the GM sway bar end links. I have heard many other 6th Gen owners having issues with their end links as well. The nut on the passenger side was backing out after I would tighten it up, causing a "clunking" noise going over bumps. If you are having this problem these BMR end links may be your solution! Also have heard of these same parts actually bending under hard driving. Not what you want! The BMR links are also adjustable, for all my hardcore track drivers. LINK: https://youtu.be/q-Qv6joDGvo PARTS: https://www.summitracing.com/parts/BMR-ELK016 Attached Images __________________ 17' Black SS 1LE with PDR Delivered…05/17/17 A dream come true!! 02' Silverado 5.3 Cammed Lowered single cab, daily driver