Quote:
Originally Posted by BrianL
That has been my experience too with the V2 I just received, although I have not yet done many drive cycles on it for the ECM "relearn" process.
After reading all of the Soler PTB string, and their insistence of doing the battery disconnect and relearn process plus some relearn steps outlined, I decided to try that process as well. Not sure if that is overkill or not as Tony hasn't mentioned that being necessary except for those who threw a code.
|
I'm still in the drive cycle stage as well, so far so good.
I decided to go with....
(B) Abbreviated learning routine. Skip battery disconnect and only do the rest of steps in bold
red font in procedure C) below. Relearn takes longer, at least 100 miles subdivided into10
driving cycles.
BTW.. Thanks for posting that link.