|
On my ZLE I run PSC2 in 345/30/19. I moved the wiring harness, and now no rubbing.
I don't know if these fit the same on a non-1LE, and you need 12" wheels.
On a side note... this weekend I re-confirmed something about PSC2 that I already knew, PSC2 are TERRIBLE tires for ZL1 on track due to the weight of the car. Do not buy PSC2 for track, they're fine for canyon performance but they heat cycle out and are like roller skates at track temps after only 4-5 heat cycles. Even in 315 front and 345 rear there is not enough rubber to overcome the poor grip once they cycle out.
|