[wylde1]

The billet part is the T-Rex overlay grille. I took that and trimmed out the center section of the stock grille and nounted the billet in it with epoxy and a couple screws. So it attaches to the fascia just like a stock grille would. Then I made some little brackets to mount the bowtie. The goal was to have the billet grille without being able to see the stock one behind it. I'm currently working on the cowl piece to cover the edges and tie the lights in better. Took me a long time to figure out how to make it, but now I've got an idea that I'm running with.

Long story short, the T-rex grille is an overlay you can buy and bolt on. But if you don't wanna see your stock grille behind it there's a little more work to do.