CAMARO6 - View Single Post

laynlo15 · 08-14-2019, 02:06 PM

I think I can make a little more, probably 875 with another smaller pulley but I don't see anymore then that. I'm dropping into the high 40s to around 50 on the low side and I have 38% fuel lobe and that's on about 15 lbs of boost. I'm going to try to make about 18 lbs and if I have to we can turn up the meth/water and I'll hook up the other nozzle if I have to for the LS Fest. We have the Meth/water turned way down so we can add some more fuel to it with just a turn of the dial .

08-14-2019, 02:06 PM	#20
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	I think I can make a little more, probably 875 with another smaller pulley but I don't see anymore then that. I'm dropping into the high 40s to around 50 on the low side and I have 38% fuel lobe and that's on about 15 lbs of boost. I'm going to try to make about 18 lbs and if I have to we can turn up the meth/water and I'll hook up the other nozzle if I have to for the LS Fest. We have the Meth/water turned way down so we can add some more fuel to it with just a turn of the dial . __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff