View Single Post
Old 10-16-2021, 01:44 PM   #1
MartinLe
 
MartinLe's Avatar
 
Drives: 2017 Chevrolet Camaro ZL1 M6
Join Date: Jul 2020
Location: OR
Posts: 479
MAGGIE 2650, JRE ROUGH IDLE CAM BUILD - A COUPLE QUESTIONS

She is going into the shop in November for the blower/cam install. But I have a problem right now.

It looks like I have a couple bad injectors; #'s 7 & 8 with 7 being the worst. Four of the other six are acting up as well. Do I/should I put the +30's in? I am not going to push the car to the limit tune-wise. It is my DD and logs fifty miles a day all freeway.

I would appreciate it if you guys would weigh in on this and help me decide which way to go. I would rather not spend the extra couple grand - but will if necessary.

Thanks in advance.
__________________
JRE Terminator Rough Idle Cam
Magnuson 2650 - 15% lower, 90mm upper
FIC+30%
DSX Flex fuel/Low side
NW 103mm TB/Roto-Fab CAI
Monster S Series
Elite E2-X
2" TSP LT's
BMR:BK063, BK060,TCA061, UTCA060, UTCA063
Weld Beadlocks/17" NT5R2
MartinLe is offline   Reply With Quote