Quote:
Originally Posted by RUQWIKR
Watch pre-load, too, on the aftermarket bars and / or with changes in ride height. The endlinks can bind up if the swaybar holes are not in the exact same place as your stock ones after install.
|
So I've read or heard that end links should not have preload somewhere.
All I did was unbolt the stock bar and installed the new bar. I did not have to pry or twist to get end link in the middle hole. Hopefully I did correctly.
appreciate your help and any feedback!
Next outing is coming up and with cooler weather and new bars I am hunting for low 8s! If so that awesome!