CAMARO6 - View Single Post

MatthewAMEL · 02-16-2017, 01:13 PM

Just to update the thread...

Swapped to DTC-30s for Sebring today.

Some notes on the install.

The rear brakes are the same Caliper as the SS Brembo kit.

Fronts have two pins and a bolt. The bolt is on the Caliper backside and is 13mm.

The Caliper pistons are small and easy to push in with your fingers.

The hawk pad numbers listed in the original post all fit.

Btw - everyone else probably knew this already, but the OEM pad is made by Fredoro

02-16-2017, 01:13 PM	#35
MatthewAMEL Drives: 2023 CT5 Blackwing Join Date: Sep 2016 Location: Orlando Posts: 1,619	Just to update the thread... Swapped to DTC-30s for Sebring today. Some notes on the install. The rear brakes are the same Caliper as the SS Brembo kit. Fronts have two pins and a bolt. The bolt is on the Caliper backside and is 13mm. The Caliper pistons are small and easy to push in with your fingers. The hawk pad numbers listed in the original post all fit. Btw - everyone else probably knew this already, but the OEM pad is made by Fredoro Attached Images __________________ 2017 HBM SS 1LE Sold 2023 Wave Metallic CT5-V Blackwing M6