[Scargoes]

Originally Posted by TrackClub

Hmmm....not sure how you move a top (or a bottom) of a round object without automatically affecting both, as a relationship between top and bottom is always 0 degrees (on a round object).

In any case, if the wheel did move rearward, presumably this would have an affect on F to R weight distribution (and not in a positive way imo).

All in all, interesting discussion. Apart from rear toe part, not quite sure how all these $ translate into faster pace, or better tire wear, etc. Cheers!

In reality, the movement was less that 5mm. It is visually perceptible if you look hard enough. The average person would likely not notice. But the positives from 2* more caster outweigh the shift in weight distribution. As for the rear toe links, I did them so I could make sure I attained the toe setting I wanted at the camber setting I wanted. And with the lockout, no replacing rear toe adj bolts every alignment.