[Joshinator99]

Originally Posted by Megahurtz

You will def need meth or larger injectors to run any sort of high Ethanol content. The fuel lobe on the cam should help with the pressure drop on the hit that is common on stock cam lobes/stock injectors with setups that really spin the blower hard and use meth to supplement the fuel.


The reality is, you will be leaning on the Meth for fuel regardless. So sort of not the best idea to spend all of that money on a build and then risk everything on a functioning meth pump. It's not often they fail, but you could run out of meth, pop a fuse, pump failure or just have a huge air bubble in the system which will make you go lean.

30% Injectors will give you some headroom to run more E but you will likely need to mix down to E60 still. Then add meth for cooling only. This will give you 99% of the power you would have had running full 85% Ethanol. Or pick up a port kit and don't worry about meth at all and run full E85.

Much better answer than I sent on IG. Nobody is trying to type paragraphs on IG DM's lol.

This is the way.