CAMARO6 - View Single Post - Stock Intake Valve Seat Failure on TSP PRC Ported Heads with Big Cam

KingLT1 · 02-23-2021, 09:32 PM

I have used Manley's in the past and the advertised length was spot on with my Digital Caliper. Either way measure the pushrod you order with the digital caliper to make sure it lines up with your measurents taken and everything should be fine. It's what I have done in the past with no issues. Some companies will allow you to swap out pushrods to a different length if they haven't been installed and ran.

02-23-2021, 09:32 PM	#98
KingLT1 Drives: 2016 1SS NFG A8 Join Date: Aug 2017 Location: 46804 Posts: 6,800	I have used Manley's in the past and the advertised length was spot on with my Digital Caliper. Either way measure the pushrod you order with the digital caliper to make sure it lines up with your measurents taken and everything should be fine. It's what I have done in the past with no issues. Some companies will allow you to swap out pushrods to a different length if they haven't been installed and ran. __________________ 2016 NFG 1SS A8 Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA