CAMARO6 - View Single Post - Hurst Billet/Plus Shifter for the 2016-2019 Camaro SS

sschons74 · 07-12-2016, 05:09 PM

Step 28 was a killer, esp. driver side. I had to get Wife to push on spring clip with screwdriver from above, while I pulled pin from underneath. Pass side wasn't bad. I ended up marking where the spring clips were on the pin with a marker. Exhaust, drive shaft all other stuff was straightforward. Exhaust came out in one assembly, pretty easy. Wish I had $ for exhaust upgrade while I did this. I don't know exactly how long it took me, I changed oil, cleaned the garage, rotated tires, cleaned wheels & did shifter, all that took me all weekend.

07-12-2016, 05:09 PM	#17
sschons74 Drives: 16 Camaro 1SS & 82 Silverado C10 Join Date: Mar 2009 Location: VA Posts: 292	Step 28 was a killer, esp. driver side. I had to get Wife to push on spring clip with screwdriver from above, while I pulled pin from underneath. Pass side wasn't bad. I ended up marking where the spring clips were on the pin with a marker. Exhaust, drive shaft all other stuff was straightforward. Exhaust came out in one assembly, pretty easy. Wish I had $ for exhaust upgrade while I did this. I don't know exactly how long it took me, I changed oil, cleaned the garage, rotated tires, cleaned wheels & did shifter, all that took me all weekend. __________________ Ordered 1SS Black on Black, M6 in late summer 2015. Hurst shifter, Soler Performance ported TB.