Quote:
Originally Posted by khcoaching
He was able to get:
Front -2.5 Camber
Rear -1.5 Camber
Front and Rear Toe -.002 toe in
He said he could get -3 in the front, but only -1.5 in the rear. 1.5 delta is too much and I had him back off the front a bit.
The tech is super knowledgeable on Vettes and Camaros......coming from 20 years in the industry, I was impressed.
Ken
|
OK You need this to get more camber out of the the REAR
https://www.splparts.com/products/ca...c-lockout.html
I run around -3.9 front and -2.9 rear camber on the street and track. BEFORE the SPLPARTS install , I could only get only around -2.0 rear camber. If you do alot of street driving, run between 38-40PSI in the STREET tires and THAT along with the TOE IN TOE OUT setting you have will minimize the tire wear issues using these aggresive camber settings for street driving