CAMARO6 - View Single Post - Magnuson 2650 Heartbreaker is on pics/video 9.84 pass

laynlo15 · 07-06-2019, 07:00 PM

Well finally got everything together and it took us about 4 hours for the install this morning. Everything went well as planned and even had the correct belt to install on the 90mm pulley. We fired it up and sounded awesome. I'll post some pics a little later and may get it to the dyno on Tuesday or Wednesday just in time to get to the Camaro Fest on Thursday. Everything bolted right up after wish pushed to fuel into the rails and it lit right up. Did a quick log and fuel trim and air intakes temps were low as expected with these big ass intercoolers. Added a second nozzle of meth so I think it will make some great passes at the Fest. We will see if the axles can handle the added hp and torque this big boy puts out. It may be in the morning before I get some pics up after I drive it and get some more data logs to figure out if everything else is ok. I know it going to need some additional tuning and some more logging at the Camaro Fest. We shall see

https://www.facebook.com/magnacharge...0952093231260/

Name: 20190707_180608.jpg
Views: 2769
Size: 212.6 KB

Name: 20190707_180608.jpg
Views: 2769
Size: 212.6 KB

Name: 20190707_180515.jpg
Views: 2488
Size: 187.0 KB

Name: Resized_20190706_121648(5).jpg
Views: 2623
Size: 138.7 KB

Name: Resized_20190706_091445.jpg
Views: 909
Size: 150.3 KB

Name: 20190706_090657.jpg
Views: 1002
Size: 193.5 KB

Name: Resized_20190702_113720(1).jpg
Views: 852
Size: 111.2 KB

Name: Resized_20190702_114306.jpg
Views: 855
Size: 108.0 KB

07-06-2019, 07:00 PM	#1
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Magnuson 2650 Heartbreaker is on pics/video 9.84 pass Well finally got everything together and it took us about 4 hours for the install this morning. Everything went well as planned and even had the correct belt to install on the 90mm pulley. We fired it up and sounded awesome. I'll post some pics a little later and may get it to the dyno on Tuesday or Wednesday just in time to get to the Camaro Fest on Thursday. Everything bolted right up after wish pushed to fuel into the rails and it lit right up. Did a quick log and fuel trim and air intakes temps were low as expected with these big ass intercoolers. Added a second nozzle of meth so I think it will make some great passes at the Fest. We will see if the axles can handle the added hp and torque this big boy puts out. It may be in the morning before I get some pics up after I drive it and get some more data logs to figure out if everything else is ok. I know it going to need some additional tuning and some more logging at the Camaro Fest. We shall see https://www.facebook.com/magnacharge...0952093231260/ __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff Last edited by laynlo15; 07-15-2019 at 05:06 PM.