Quote:
Originally Posted by Baddawg53
Is that the bushing in the toe rod? I have yet to see them sold separately anywhere. I know the #2 bushings are available as spherical bearings, but #3 I was planning on eventually just replacing the toe rod as an entire piece.
I know this doesn't help with getting just a bushing, I'm curious what you end up going with, I've slowly been upgrading all my suspension.
|
Nah, the bushing in the toe arm is one piece already in the tow arm photo, the bushing I’m talking about is apart of the knuckle itself. It’s the lowest most bushing that goes to the lower control arm itself
Here’s 2 pics that hopefully clear up the bushing in question
The toe arm screws into the knuckle entirety, you can just replace with a aftermarket toe arm. BMR probably the most popular, I replaced mine to Megan racing (blue) arms since they were cheap at a local deal and I needed to replace one anyways