Quote:
Originally Posted by TJay74
The clicking noise is typically the wheels, there is a TSB out there about it. The remedy is to remove the wheels, clean the hub with a wire brush and then put some white lithium grease on the hub area where the rotor rides. Then clean the backside of the wheel and the hub opening as well.
Once all that is done and you go to remount the wheel the torque spec calls for 140 ft lbs for the lug nuts.
|
Did that recently as I wanted to torque the passenger side. Sadly didn't make a difference for me but I'm thinking that since the bellows boot was off for god knows how long that a bunch of the grease/lube dried up. The noise is has returned not as bad as before but I remember it was like this before it got worse, I'll have to get some of the right grease/lube and apply it to the bellows boot/tie rod/steering rack portion to see