Thread: Exhaust Cost
View Single Post
Old 09-26-2019, 07:36 PM   #37
My First Camaro!
 
My First Camaro!'s Avatar
 
Drives: '18 5.7 RAM 1500 18' 1SS
Join Date: Jun 2009
Location: CA
Posts: 156
Quote:
Originally Posted by enzia35 View Post
You listed a 5th gen s-type system that is 2.5”.
You listed a 6th gen ATAK system that is 3”.

Apples to apples indeed.

A 5th gen 2.5” ATAK catback 140356 from Juiced is $1250

This is what Borla suggests on how to build a catback per this post:
https://www.camaro6.com/forums/showp...64&postcount=1
Get the 6th gen 2.75” ATAK dual tip axleback 11923: $793
Get the 6th gen non-AFM midpipe 60607: $573

Total is $1366. That’s only $116 difference.

At MSRP, 140356 is $1442.
11923 and 60607 is $1637.

Difference of $200. But please tell me you’re not buying at MSRP because I’d have to laugh at you even harder.

With the discount codes that Juiced will give you just for asking, the difference comes out to right around $40 between the 5th gen system and the 6th gen one.
Weak sauce. They only make a 3" non NPP catback for 6th gen. 5th gen only has a 2.5 offered that is not a special request. Both are 304 same company, no AFM, no NPP, dual tip. So yes, it is as close as can be. Stop playing dumb.

Your just moving the goal post everything your proven wrong. This demonstrates that your just dishonest.

Discount codes? GTFO. Next you will say some BS about by used its cheaper. Its simple stupid: Many 6th gen systems cost up to double of the 5th gen and there really is no good reason for it.

Also, your example illustrates more of my points.
1. You have to cut your exhaust. That adds more cost.
2. this is not a bolt on.

But since your so smart and always right this should be easy for you:
Find a 6th gen 304 true bolt on 3" system w/mufflers new for less than 1200 or less. Go ahead and prove me wrong. I do not think you will even try. You will probably deflect and claim victory.
__________________
JRE Tune
My First Camaro! is offline   Reply With Quote