thank you for that measurement. It is very helpful. By chance, would you be able to measure the thickness of the rotor where the wheel studs are? Because the wheel sits on that surface, I am thinking that the added space will be large enough to fit the calipers if that is included as well.
__________________
9/9/2021 - 1100 (date of deposit)
10/15/2021 - 2000
11/4/2021 - 3100 Status TPW 11/15
11/9/2021 - 3400 Status TPW 11/15
11/24/2021 - 3800 Status built 11/21/2021
12/2/2021 - 5000 Status
12/13/2021 - 6000 Status
|