Quote:
Originally Posted by Camaro1973
Your high side is going to run out before low side. An 80mm with a 9.2 lower will put you at 18psi or more. Not even doable.
700 would be absolute max on high side/stock cam unless your pumping in meth and 700 is pushing it. 680 is more typical.
Mods your showing for phase 1 would be maybe 680rwhp with a 90mm pulley, then your out of fuel.
You don’t need to worry about the low side until you add a cam.
|
Did you notice any drop in MAT temps cruising in comparison to the stock blower? Also, any change in temps when WOT?
Thanks!