Finally got it all set up for some dyno pulls and tuning of the MAF, etc for the new ported Lt2 and 95mm TB. No other changes have been made since the install so we'll see where we are at by about noon. Remember it made 431 on just E85 and Rotofab CAI. That was on E57 or E58, we should be a little higher on these pulls, I'll add the new E in the morning and hopefully it will be in the mid E60s. Not much more power to be made above E65 on a stock motor with just bolt on parts. Will post some info tomorrow afternoon.
Ported LT2/Stock 95mm TB
This next one is from the March 2022 Lt1 IM/TB
Had the dyno guy send me a pic of the pull
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
