CAMARO6 - View Single Post - ZL1 1LE Front Brake Rotor Turn vs. Replace

ICTsccaCamaro · 02-02-2021, 02:20 PM

I need to address my warped front brake rotors before this season starts, I am hoping to have more air flow to the front brakes with the addition of the SS 1LE larger track brake ducts that I installed at the end of last season (after my rotors were already warped).

How many guys have turned or machined their front rotors and had good results. My only worry is the reduced rotor thickness causing it to warp again, or just replaced them with OEM rotors or aftermarket?

Ideally I would just put new rotor rings on the factory hats and call it a day but that doesn't look to be a option.
Thanks.

02-02-2021, 02:20 PM	#1
ICTsccaCamaro ITCRNRS Drives: 2018 ZL1 1LE Join Date: Jun 2012 Location: Wichita KS Posts: 1,575	ZL1 1LE Front Brake Rotor Turn vs. Replace I need to address my warped front brake rotors before this season starts, I am hoping to have more air flow to the front brakes with the addition of the SS 1LE larger track brake ducts that I installed at the end of last season (after my rotors were already warped). How many guys have turned or machined their front rotors and had good results. My only worry is the reduced rotor thickness causing it to warp again, or just replaced them with OEM rotors or aftermarket? Ideally I would just put new rotor rings on the factory hats and call it a day but that doesn't look to be a option. Thanks. __________________ 2018 ZL1 1LE Ordered 6/29/17 Built 11/6/17 Delivered 12/7/17, Summit White, PDR, NAV, https://www.youtube.com/c/tylerpotter SOLD: 2014 Summit White 1LE 2SS/RS, Recaros, NPP, NAV, KONI Yellow's SOLD: 2012 Black 2LT/RS, Fully 1LE swapped, Brembo swap