CAMARO6 - View Single Post - WARNING: Front end Clunk - Loose Sway Bar Endlinks (please check yours)

Tara Martin · 07-12-2018, 10:14 AM

I've had loose sway bar end links most of my car's life. It started rattling early on before the TSB, so I tightened them myself. They loosened again, so I retightened and used Locktite. The TSB came out with new nuts and Locktite, so since I was getting the front spring TSB done, I told them to do the sway bar end link TSB as well. Now, about 8 months later, loose sway bar end link nuts again! I took it to a local shop and they put it up on a lift. Previously, every time I tightened the nuts, it was the left side only that was loose. This most recent time, after the GM TSB, both sides were loose and the right side was the worst! At my own time and expense, I had them tightened again.

This is getting old. A $65K car rattling like a 30 year old pickup truck? Why can't they get this right?

07-12-2018, 10:14 AM	#246
Tara Martin Loves Camaros Drives: Red '79 Z28, '21 Red Hot M6 ZL-1! Join Date: Sep 2012 Location: Corpus Christi, TX Posts: 1,623 View My Garage	I've had loose sway bar end links most of my car's life. It started rattling early on before the TSB, so I tightened them myself. They loosened again, so I retightened and used Locktite. The TSB came out with new nuts and Locktite, so since I was getting the front spring TSB done, I told them to do the sway bar end link TSB as well. Now, about 8 months later, loose sway bar end link nuts again! I took it to a local shop and they put it up on a lift. Previously, every time I tightened the nuts, it was the left side only that was loose. This most recent time, after the GM TSB, both sides were loose and the right side was the worst! At my own time and expense, I had them tightened again. This is getting old. A $65K car rattling like a 30 year old pickup truck? Why can't they get this right? __________________ Old and new, sharing space!