[Ryephile]

Originally Posted by RXtacy

Yes each time you swap you need to relearn. Takes about 30 seconds. I also got the tool on amazon ~$18.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Originally Posted by Yanbags

...Our OEMs are aluminum if you look at it. OEM P#: 13598787

These two items are exactly what I have and they work great, and with the PDR.

When you swap the sets, you have to re-learn the sensors. It's easy:
*engage e-brake
*car "on" in accessory mode (press and hold start button for 5 seconds) or engine running, your call
*go to tire pressure screen in IP
*press and hold "sel" on the steering wheel until the car says TPMS learning active
*have the TPMS tool in-hand. Start at the Left Front tire, point through the tire sidewall towards the valve stem. Press and hold the button until the car honks.
*move to the right front tire. Press the button until the honk
*right rear tire, repeat
*left rear tire, repeat
*when you successfully do all 4 corners, the car will then double honk to signal a successful pairing.
*observe new tire pressures in the IP