[That1guy_tim]

This brings us to present day! 1/21/23

My car is all torn apart and cut up in my garage!

I found a fender at the junk yard and wanted to try my hand at Aerodynamics.

I enjoy the folded in fender look on some GT cars and no one makes that style fender for us. (Anderson composites carbon fenders are close)

So i chopped up the fender, Formed it with my hands and cut some sheet metal to weld into place. ( I think it's goin to look killer when its done)

While the engine is apart and I'm waiting on parts to come in i decided to tackle some of the suspension issues.

Gandrud Chevy had the ZLE solid subframe bushings in stock. So i drove up there and grabbed a set!

Ordered a good chunk of the SPL Parts catalog. Rear knuckle bushings. Front caster arm bushing, Sway bar links, and rear upper camber arm!

Fortune auto coilovers are also on order. ( Full write up when those arrive)

So as the car sits at the moment the heads are off and waiting for parts from GPI, SPL knuckle bushings are now pressed in. Solid subframe bushings installed. just waiting for the rest of the parts to arrive.