CAMARO6 - View Single Post

Lt4zl1 · 05-26-2019, 10:12 AM

https://www.crawford-racing.com/superchargers
This is now been done by Crawford racing and there is a zr1 that just ran 8.8@ 158 so this setup is proving to put run procharger builds now on 22 psi. So Crawford got it down before weapon x said boo on any kind of kit. Just updating an old thread obviously as this is a very hot topic on the corvette forum. Those that haven’t seen it the 2016 ctsv with this swap has made 1026whp so far on 22 psi with stock heads but has a cam in it.

05-26-2019, 10:12 AM	#38
Lt4zl1 Drives: 2017 zl1 camaro Join Date: Feb 2019 Location: Florida Posts: 51	https://www.crawford-racing.com/superchargers This is now been done by Crawford racing and there is a zr1 that just ran 8.8@ 158 so this setup is proving to put run procharger builds now on 22 psi. So Crawford got it down before weapon x said boo on any kind of kit. Just updating an old thread obviously as this is a very hot topic on the corvette forum. Those that haven’t seen it the 2016 ctsv with this swap has made 1026whp so far on 22 psi with stock heads but has a cam in it. __________________ 9.52@143 first bolt on only car to reach 9.50s. First zl1 in the 9s on stock unported blower. Sbe LME heads gptuning cam typical mods jokerz prototype port blower 9.30@150 best so far work in progress. 4.70 60-130 at 3800da now in Tennessee.