[Nitro66215]

Cluster $520.94. $300 programmed WITH HUD option. $250 without.

IO6 HMI - $520.76. $50 programmed

HUD - Retail for all parts.... just to get it working... NO MOST wiring....
HUD - $399.19
Upper Trim Cover - $145.27
HUD Trim Bezel - $20.22
HUD Switches - $48.32
Front Dash Trim - $139.21
Bezel for Switches - $9.72
X1 Cable - $17.96
USB Cable - $61.03
Switches Cable - $34.51
1 wire for Cluster to HUD = $5.77
Bolts (x10... need 4) = $10.80
Nuts (4) = $18.72
Total if purchased retail = $910.72

My Cost after eBay and other purchases..... $632.97

Cost to get wires needed for MOST configuration...

Retail
Cluster wires - X4 - $23.08
Stranded wire - 22gauge... varies... about $5

so $28. or so.

My cost ... 100 Pin terminals purchased (only way) ... and wire... $20.

Retailish - Whole job with programming... HUD + Cluster + HMI + MOST Wiring = $2330.6

My costish - $2044.85

I purchased the Cluster and HMI to be exactly what would be in my car. Not used parts. Finding used parts that could be programmed to the car isn't too easy if you want the exact cluster reading. SS cluster is fine... just have to get Chris to program special. The HMI wasn't too easy to find either. Getting the right one that will work in the US and not be an EXPORT HMI was crazy. I went through 2 "cheap" purchases on eBay and had to return both because they were exported modules. They do not have USA maps.