CAMARO6 - View Single Post - What did you do to your EU 6g Camaro today

Gary H · 04-17-2020, 05:22 PM

All the mods listed below, I'm thinking an additional 150 ATW, so 700 at the wheels overall.

@mrgoodbytes - Yes, but only slightly tighter needing a little more pressure on the lug nuts, but re-checked after 100 miles and everything was still good

04-17-2020, 05:22 PM	#115
Gary H Drives: Camaro ZL1 Join Date: Apr 2019 Location: London, UK Posts: 304	All the mods listed below, I'm thinking an additional 150 ATW, so 700 at the wheels overall. @mrgoodbytes - Yes, but only slightly tighter needing a little more pressure on the lug nuts, but re-checked after 100 miles and everything was still good __________________ Made in the USA. Refined in Great Britain - insta: zl1uk Velossa intake, Rotofab, Mamo TB, Custom ported NX Lid & Jokerz Full tilt ported LT4 charger, 3 port CoolingMist Meth injection - ATI 15% lower pulley, E2X CC, TSP ceramic coated longtubes, de-cat and Borla 60608 to NPP box, JRE tune, BMR rear control & trailing arms, lock-out kit, lowering springs and front strut brace, Custom carbon trim interior, Xpel ultimate front PPF and Prestige window tint with Chameleon Windscreen tint...ever evolving...