CAMARO6 - View Single Post

VinnAY · 05-21-2020, 04:38 PM

I ran a 285/35 and 275/35 Frt/Rr in an A/S tire, maybe consider those sizes. I used the BFG Comp2 A/S with no problems at all on the OE 1LE wheels. You have a little more option to depart in sizes from OE. Trying to get in these widths on a 30 profile is difficult on an A/S, but 35 series has a few more possibilities. In those sizes too I saw no deviation on the speedo. It was no more than 1mph off from stock speedo calibration.

I couldn't say why you don't mix manuf it's just a "rule". Especially on one axle.

05-21-2020, 04:38 PM	#2
VinnAY Account Suspended Drives: 18 1SS/1LE Join Date: Jun 2018 Location: Missouri Posts: 939	I ran a 285/35 and 275/35 Frt/Rr in an A/S tire, maybe consider those sizes. I used the BFG Comp2 A/S with no problems at all on the OE 1LE wheels. You have a little more option to depart in sizes from OE. Trying to get in these widths on a 30 profile is difficult on an A/S, but 35 series has a few more possibilities. In those sizes too I saw no deviation on the speedo. It was no more than 1mph off from stock speedo calibration. I couldn't say why you don't mix manuf it's just a "rule". Especially on one axle.