Hello everyone, I’m Wes with RaceChip. As b0bsaget007 stated (and thanks for sharing it) we have just released our RaceChip for the 2.0L Turbo Camaro. There are 3 chips available for the Camaro. The S, RS & GTS Black. We also have the XLR throttle tuner available for it.
We are a German company that has been around for 10 years. We sell >100,000 products in 135 countries per year and have 100 employees at locations in Stuttgart, Munich, Shanghai and – brand new - California. We have 10+ specialists doing nothing else than developing Hardware, Firmware and Software. All done inhouse.
In 2018, we opened an office in Southern California where our team helped developing the chip for the Camaro. As Start The Machine stated the HP and LB-FT listed on the website are at the crank and the dyno chart he was nice enough to share is wheel horsepower. In the US part of the development and testing of the tune for the chip we used a DynoJet dyno. I will comment on the chart further below. We want to make sure that everything works correctly so we double and triple check.
I would also like to thank Jason@JacFab for sharing his experience as our tester.
The advantage with a piggyback system is that the stock ECU safety measures stay in place. We do try to push the motor more, but not enough to have issues. Having issues is something we don’t want.
If you have any questions, please don’t hesitate to post them on the forum. We are a sponsor and will be on here every day. I will write more explanations in new posts below.
For the installation, please check following video: