[custommx3]

Originally Posted by maxboy02

A couple things that helped me with my install that I would add that hasn't really been shown:

to remove the upper fascia support, I had to bend the hood release over as the arrow shows in order to have access underneath

https://flic.kr/p/DenwoB

After I drilled out the hole behind where the original emblem was, I mounted the glow-tie in its place and routed the cable as shown:

https://flic.kr/p/22SMrz6

Instead of removing the whole front bumper, I removed the wheel liner and switched the harness per the install instructions:

https://flic.kr/p/22SM3RF
https://flic.kr/p/21xm26c

Turned out great!

https://flic.kr/p/DenghK

THANK YOU!!